TM 9-2330-275-14&P
4-34. REAR AXLE REPLACEMENT (M832) (Con’t).
2.
Install rear axle (1) on dolly with two trunnion caps (16) and eight new Iockwashers (17) and screws (18).
NOTE
For the M832 (SN J089-001 thru 159 and J017-160thru 350), mounting bracket
12255119 (8) Is raplaced by mounting bracket 12448800 (11).
3.
Install mounting bracket (8 or 11) with four new Iockwashers (1 0) and screws (9).
4.
Install wire rope assembly (3) on rear axle (1) with screw (14), and connect pin (13) to rear axle (l).
5.
Install shroud (5) on rear axle (1) with two new Iockwashers (7) and bolts (6).
6.
Position left and right wire rope assemblies (3) on rear axle (1) and secure with two new rivets (2).
NOTE
The M832 (SN J089-001 thru 159 and J017-160 thru 350) does not have a
positioning lever.
7.
Install positioning lever (12) on rear axle(1) and connect with right and left pins (4).
FOLLOW-ON TASKS:
. Install wiring harness on rear axle (para 4-25)
l Install rear stabilizer bar (para 4-66).
l Connect alining rods (para 4-65).
l Install power cluster (para 4-39).
l Install hydraulic pump (M832 except SN J089-001 thru 159 and J017-160 thru 350) (para 4-75).
l Install hydraulic pump (M832 SN J089-001 thru 159 and JO1 7-160 thru 350 only) (para 4-78).
l Install hydraulic broke tines and fittings (para 4-40).
l Install axle spindle (para 4-37).
• Install handbrake lever (para 4-36).
. Install platform (M832 except SN J089-001 thru 159 and J017-160 thru 350) (para 4-52).
l Install platform (M832 SN J089-001 thru 159 and J017-160 thru 350 only) (para 4-53).
4-79
