TM 9-2330-275-14&P
4-36. HANDBRAKE LEVER AND CABLE REPLACEMENT (Con’t).
5.
NOTE
End of cable maybe difficult to pull through hole in dust shield. Tap end of
cable through dust shield to remove.
Pull end (8) of handbrake cable (12) through backing plate (6), and remove handbrake cable (12) with
handbrake lever assembly(14) from dolly set.
6.
7.
8.
Inspect plug (5) for damage or deterioration. Remove and discard if damaged.
Remove two bolts (23) and spacers (22), cable clamp (21), and spacer (20) from handbrake lever assembly
(14).
Remove cotter pin (16), pin (24), and washer (15) to disconnect handbrake cable (12) from link (13) of
handbrake lever assembly (14). Discard cotter pin.
4 - 83
