TM 9-2330-275-14&P
4-31. STEERING KNUCKLE REPLACEMENT (Con’t).
2.
Remove kingpin key (14) from front axle.
3.
Remove kingpin (13), steering knuckle (6), bearing (12), shim (9), and two flat washers (10 and 11) from front
axle.
4.
If damaged, remove two grease fitings (8) from steering knuckle (6). Discard grease fitings.
NOTE
For installation purposes, note position of screw.
5.
Loosen nut (16) and remove screw (15) and nut (16) from steering knuckle (6).
NOTE
For installation purposes, note position of bushings.
6.
If damaged, remove two bushings (7) from steering knuckle (6). Discard bushings.
7.
If damaged, remove 12 studs (17) from steering knuckle (6). Discard studs.
4-72
