TM 9-2330-275-14&P
4-29. TIE-ROD REPLACEMENT (Con’t).
c.
lNSTALLATION
NOTE
l Perform steps 1 through 4 for M832 and M840.
l Perform steps 5 through 7 for M689.
1.
If removed, install new grease fitting (8) end rubber boot (12) to each tie-rod end (9).
2.
Loosey install two tie-rod ends (9) and nuts (10) tie-rod(11).
3.
Install tie-rod(11) with two nuts (14).
4.
Install new cotter pin (13) in each end of tie-rod(11).
M689
5.
If removed, install new grease fitting (1) to each tie-rod end (3).
6.
Loosely install two tie-rod ends (3) and nuts (4) to tie-rod (5).
7.
install tie-rod (5) with two bolts (2), new lockwashers (6), and nuts (7).
FOLLOW-ON TASKS:
l Aline wheels (para 4-32).
4 - 68
