TM 10-8340-243-13&P
OPERATOR MAINTENANCE
MODULAR COMMAND POST SYSTEM (MCPS), SMALL
SERVICE UPON RECEIPT
INITIAL SETUP
Tools and Special Tools
Personnel Required
None Required
One
Materials/Parts
References
None Required
FED-SPEC-PPP-B-601
Equipment Condition
Packed (WP 0005)
SERVICE UPON RECEIPT
Unpacking
The MCPS components, will be packaged in a cleated plywood crate as per FED-SPEC-PPP-B-601, that
is 75 inches long, 27 inches wide, and 42 inches deep. The box is strapped to a wooden pallet. Upon
receipt, check for damage. Report any damage to the carrier and your supervisor.
CAUTION
Unpack components carefully. Improper or hasty
handling may result in damage to the MCPS
components and accessories.
1. Cut and remove retaining straps holding crate to pallet. Remove crate from wooden pallet.
2. Position crate to be unpacked with the top facing up.
3. Open the crate, remove packing material, and set it aside. Do not cut, rip, or otherwise damage the
packing material.
4. Lift the components from the crate. Save the shipping crate and any packing material so it can be
reused.
END OF TASK
0011-1
