TM 10-8340-243-13&P
0011
Inspecting Unpacked Equipment
1. Check the equipment for damage incurred during shipment. Report any damage on DD Form 6,
Packaging Improvement Report. Also note damage on DA Form 2404, Equipment Inspection and
Maintenance Worksheet, and initiate corrective maintenance procedures.
2. Inspect the contents of the shipment against the packing slip and the Components of End Item
(COEI) to see if any items are missing. Report any discrepancies noted in accordance with
instructions in DA PAM 750-8. The equipment can be placed in service even if accessories, or other
parts/assemblies that are not affecting proper functioning, are missing.
3. Check DA PAM 25-30 to see if there is any Maintenance Work Order (MWO) applicable to the MCPS
components you are unpacking. If an MWO is listed, check to see if it has been applied to the
equipment. The MWO number will be shown on the case/bag near the equipment nomenclature. If a
current MWO is listed in DA PAM 25-30 but there is no evidence that it has been applied to the
equipment you are unpacking, note discrepancy on DA Form 2404, Equipment Inspection and
Maintenance Worksheet.
END OF TASK
END OF WORK PACKAGE
0011-2
