TM 10-8340-243-13&P
0010
Table 1. Preventative Maintenance Checks and Services (PMCS) - Continued.
ITEM
INTERVAL
ITEM TO BE
PROCEDURE
EQUIPMENT
NO.
CHECKED OR
NOT READY
SERVICED
/AVAILABLE IF:
13
Before,
Light Set
During,
WARNING
After
Lethal voltage is present when light set
is connected to power source.
Disconnect from power source before
inspecting or repairing any electrical
component. Be careful not to contact
electrical connections. Electrical shock
and death may result from failure to
heed this warning.
Inspect light assembly (Figure 4, Item
Light dirty or
1) for physical damage and cleanliness.
shows evidence of
physical damage.
Check male and female cable
Cables or plugs
assemblies (Figure 4, Item 2) for
damaged or worn.
physical damage to plug (Figure 4,
Item 3) or insulation. If damaged, turn
in to higher level maintenance.
Check for security and proper
Switch or lamp
functioning of ON/ OFF switch (Figure
inoperative or
malfunctioning.
If damaged, turn in to higher level
maintenance.
14
After
Light Set
Clean light assembly (Figure 4, Item 1)
Lights dirty.
by wiping with dry cloth.
15
Before,
Filter
Check filter (Figure 4, Item 6) for tears
Light escapes
After
or punctures.
through area other
than designated
opening.
0010-6
