TM 10-8340-243-13&P
0002
material. When loaded, it is approximately 70 inches long, 19 inches wide and 9 inches high. Four quick
disconnect male fasteners are located along one side about 15 inches apart. Corresponding quick
disconnect female fasteners are located on the opposite side. Both ends are secured with one each
additional quick disconnect male/female fastener, as well as 2-inch strips of hook and pile fasteners. One
carrying handle is located at each end of the bag. A label with abbreviated frame set up instructions is
sewn to the inside of the bag. An identification label is also sewn to the inside of the bag. Additionally,
"FRAME BAG" and a weight limit warning are stenciled onto the side. One frame transport bag is issued
with each MCPS.
material. When loaded, it is approximately 36 inches long, 26 inches wide and 15 inches high. Three
quick disconnect male fasteners are located along one side approximately 14 inches apart.
Corresponding quick disconnect female fasteners are located on the opposite side. Both ends are
secured with one each additional quick disconnect male/female fastener, as well as 2-inch strips of hook
and pile fasteners. One carrying handle is located at each end of the bag. An identification label is sewn
to the inside of the bag. Additionally, "TENT BAG" and a weight limit warning is stenciled onto the side.
Two fabric transport bags are issued with each MCPS.
Tent Pin Container. The tent pin container (Figure 18, Item 3) is constructed of a polyester cloth. It is
approximately 37 inches long and 15 inches wide. The container is secured with tie straps. One tent
pin container is issued with each MCPS.
2
1
3
