Field Table Assembly.

TM 10-8340-243-13&P

0002

Field Table Assembly. Two field table assemblies (Figure 16, Item 1) are included with the MCPS.

Folding leg assemblies (Figure 16, Item 2) allow the field table assemblies to be stored in a minimum

amount of space.

Mapboard Assembly. Four mapboard assemblies (Figure 16, Item 3) are provided with the Type I

MCPS. Each mapboard assembly consists of a rollable overlay (Figure 16, Item 4) and a rigid overlay

(Figure 16, Item 5), fastened to a plywood panel (Figure 16, Item 6) by means of locator assemblies

(Figure 16, Item 7). Complexers (Figure 16, Item 8) on the back of the panel allow mapboard

assemblies to be joined together. A channel (Figure 16, Item 9) at the bottom of the mapboard assembly

holds pens or markers.

Support Straps. The support straps (Figure 16, Item 10) are constructed of 1-inch wide nylon webbing.

The straps are 10 inches long. A grommet is located at one end through which a hook is inserted.

Support straps are used to suspend mapboards from the frame. Ten support straps are issued with each

MCPS.

Figure 16. Table and Mapboard.