TM 10-8340-243-13&P
0002
Rain Gutter Assembly. The rain gutter (Figure 7,
Item 1) is
constructed of
the same material as
the
plain wall. It is approximately 13 feet, 3 inches long and 19 inches wide. Eight quick disconnect male
fasteners are located 18 inches apart along each side. A strip of 2-inch hook fastener is sewn to each
outside edge, and a strip of 2-inch pile fastener is sewn to each inside edge. Strips of 2-inch wide hook
and pile fasteners are located on each end flap. The rain gutter provides the means to complex Modular
Command Post Systems together and provide protection from the weather when two or more systems are
joined. An identification label is sewn on the side of the gutter. One rain gutter is provided with each
MCPS.
1