TM 10-8340-243-13&P
0002
Window Wall Assembly. The window wall (Figure 3, Item 1) is similar to the plain wall except that it
contains a 38-inch by 38-inch clear plastic window, a nylon webbing screen, and a window flap. The
screen is sewn into the window opening. The window is sewn to the bottom seam of the window opening
and 1-inch wide pile fastener strips are located around its outer edges. A 1-inch wide hook fastener strip
is located around the inside seams of the window opening. On the outside, a window flap with 1-inch wide
pile fastener strips along its inside edge is sewn to the upper window seam. Two, -inch wide roll up
straps are located just above the window flap. A 1-inch wide hook fastener strip is located around the
outside seam of the window opening. Two window walls are issued with each MCPS.
1
