REPAIR OF SINK ASSEMBLY

REPAIR OF DRAIN HOSES (SINGLE OR THREE SINK)

TM-10-7360-211-13P Food Sanitation Center (FSC) NSN 7360-01-277-2668 Manual
Page Navigation
43

TM 10-7360-211-13&P 4-6 Change 7 4-11. REPAIR OF SINK ASSEMBLY INITIAL SET UP Tools General Mechanic's Tool Kit (Item 1, Section III, Appendix B) Wrench, Adjustable (Item 12, Section III, Appendix B) Materials/Parts Sealing Compound Equipment Condition Sink cover (1) removed. Drain hoses removed (para 2-8a(3)(c)). REMOVAL 1. Remove cotter pin (4) from bottom of valve handle (5). 2. Remove valve handle (5). 3. Unscrew the coupling (3) from drain valve (6) at rear of sink body (2). 4. Unscrew the drain valve (6) from sink body (2). 1. Replace defective parts. 2. Place sealing compound (Item 5, Appendix E) on all threads to ensure a leak proof seal. 3. Install drain valve (6) by threading onto sink body (2). 4. Align drain valve (6) with valve handle (5) stem and slide into place. 5. Install cotter pin (4) through valve handle (5) and drain valve (6). 6. Thread coupling (3) into drain valve (6) and tighten. REPLACE

Privacy Statement
Press Release
Contact