TM 10-7360-211-13&P 4-8     Change 7      4-13. REPAIR OF DRAIN TABLE OR WORKTABLE. INITIAL SET UP Tools General Mechanic's Tool Kit (Item 1, Section III, Appendix B) Materials/Parts Lock Washer General Purpose Lubricating Oil (Item 3, Appendix E)                                                       NOTE  If table hinges are bent or difficult          to use repair by straightening hinge        link with hand tools.  Lubricate friction areas, if necessary with general purpose lubricating oil. REMOVAL 1.  Remove eight nuts (2) and lock      washers (3). 2.  Remove table leg (4) off table. REPLACE 1.  Install table leg (4)            on table top (1). 2.  Install eight lock washers (3)             and nuts (2) on studs and             tighten. 4-13.1     REPAIR OF  LIGHT, EXTENSION INITIAL SET UP Tools General Mechanic's Tool Kit (Item 1, Section III, Appendix B) Materials/Parts Kit, Relamping (Item 4, Group 2, Appendix F), gloves, goggles Equipment Condition Unplugged from power source