TM 10-7360-211-13&P
Change 7 2- 19
2-8. DISASSEMBLY AND PREPARATION FOR MOVEMENT (CONTD).
(d) Remove sink adapter (6) to separate the sink body assemblies (7), burner rack (8), and base rack (9); leave the burner
units (10) in the burner racks (8).
(4) Work Table.
(a) Remove the shelf (1) from the work table crossbars (2).
(b) Turn the table upside down.
(c) Push-in the linkage of each table leg from its fully extended position, and fold the table legs to lie flat
against the bottom of the table top. Refer to illustration on drain table, paragraph 2-8a(2).
(5) Storage Racks Assembly.
(a) Remove the shelves (front cover) (1) from the storage rack assembly (2).
(b) Disassemble the stacked rack units (3) and place the front cover (1) on each storage rack assembly (2).
