TM 10-7360-211-13&P
Change 6 2-17
2-6. DISASSEMBLY AND PREPARATION FOR MOVEMENT.
a. Disassembly.
WARNING
§ Allow the burner units and lanterns to cool before releasing air pressure
from fuel tanks. Do not smoke and make sure there is no open flame in
the vicinity. Fuel fumes are explosive and highly flammable.
§ Bleed all burner units and lanterns of air before storage.
§ Drain all fuel from equipment into fuel can before movement or storage.
NOTE
As required, clean all FSC components in hot soapy water. Rinse with
clean water and dry thoroughly prior to assembly, packaging, and packing.
(1) Burner Units.
(a) Remove the burner units from the sink assemblies. Drain the fuel tanks and prepare the burner unit
for movement IAW TM 10-7360-204-13&P or TM 10-7310-281-13&P.
(b) Return burner units to the sink assembly burner racks.
(2) Drain table.
(a) Remove shelf (2) and detach the drain table (1) from the rim (3) of the sink assembly (4).
