TM 10-7360-208-13&P
4-13. REPAIR OF GRIDDLE ASSEMBLY (CONT).
REMOVAL
1.
Pull the long splash guard (2) and short splash guards (3) up and off the griddle (1).
2.
Remove the grease slot plug (4).
3.
Unhook the grease chute (5) from the center member of the double burner rack (6). Pull the grease chute (5)
downward and out of the griddle top grease slot.
4.
Lift griddle (1) off of double burner rack (6).
5.
Remove six nuts (7) and six screws (8) to remove two heat guards (9).
REPLACE
1.
Install two heat guards (9) with six nuts (7) and six screws (8).
2.
Assemble griddle (1) on to double burner rack (6).
3.
Hook on the grease chute (5) to the center member of the double burner rack (6). Push the grease chute (5) upward
into griddle top grease slot.
4.
Install grease slot plug (4).
5.
Install splash guards (2) and (3) onto griddle (1).
4-11
