TM 10-7360-208-13&P
4-11.
REPAIR OF OVEN ASSEMBLY (CONT).
REMOVAL
1.
Pull up and remove vent caps (2) from oven assembly (1).
2.
Remove four locknuts (3) and screws (4) to remove two carrying handles (5).
3.
Remove eight screws (6) to remove four handle holders (7).
4.
Open door (14) and remove oven racks (8).
5.
Tilt back the oven assembly so it lays on its back side (oven door (14) up).
6.
Remove four screws (9) and deflectors (10).
7.
Remove two T-bolts (11) that hold insulation bracket (12).
8.
Pull-out the insulation (13) to release it from the lip at the top of the frame.
REPLACE
1.
Place the top of the insulation (13) under the lip of the frame while carefully pushing up.
2.
Install insulation bracket (12) with two T-bolts (11).
3.
Install deflectors (10) with four screws (9).
4.
Bring the oven assembly into an upright position.
5.
Open door to slide-in oven rack (8).
6.
Install four handle holders (7) with eight screws (6).
7.
Install two carrying handles (5) with four locknuts (3) and screws (4).
8.
Push-in two vent caps (2) into position on top of oven assembly (1).
4-8
