TM 10-7360-208-13&P
4-17. REPAIR OF WORK TABLE.
INITIAL SETUP
Tools
General Mechanic's Tool Kit (Item 1, Section III, Appendix B)
Material/Parts
Lockwasher
General Purpose Lubricating Oil (Item 5, Appendix E)
NOTE
If table hinges are bent or difficult to use,
repair by straightening hinge link with hand
tools.
Lubricate friction areas, if necessary with
general purpose lubricating oil.
REMOVAL
1.
Remove eight nuts (2) and lockwashers (3).
2.
Remove table leg (4) from table top (1).
REPLACE
1.
Install table leg (4) on table top (1).
2.
Install eight lock lockwashers (3) and nuts (2) on studs
and tighten.
4-16
