TM 10-5411-235-13
FLOOR DRAIN PLUG
THIS WORK PACKAGE COVERS:
Replace
INITIAL SETUP:
Maintenance Level
Direct Support
Tools:
Drill (WP 0042, Table 2, Item 4)
Safety Goggles (WP 0044, Table 1, Item 35)
Riveting Tool (WP 0042, Table 2, Item 2)
Materials/Parts:
Dome Head Pop-Rivets (WP 0044, Table 1, Items 27 & 28)
Floor Drain Plug
REMOVE
WARNING
Drilling creates metal chips which may enter eyes and cause
serious injury. Eye protection is required.
CAUTION
Make sure the drill bit has a drill stop attached to prevent
drill bit from exceeding a depth of one inch.
1. Using a drill, carefully drill out the the rivet (2) securing chain to floor.
2. Remove drain plug and chain (1).
INSTALL
1. Install drain plug into pan.
2. Install rivet (2) securing chain to floor.
0037 00-1
