TM 10-5411-235-13
DIRECT SUPPORT MAINTENANCE-GENERAL RIVET REMOVAL AND INSTALLATION
PROCEDURES
THIS WORK PACKAGE COVERS:
Replace
INITIAL SETUP:
Maintenance Level
Direct
Tools:
General Mechanics Tool Kit ( WP 0042, Table 2, Item 1)
Riveting Tool (WP 0042, Table 2, Item 02)
Rosan Insert Tool (WP 0042, Table 2, Item 05)
Drill (WP 0042, Table 2, Item 04)
Materials/Parts:
Rivets (See Table 2)
GENERAL. These procedures are general procedures that may be needed during repair or
replacement of shelter components. Wherever these general procedures apply, they are referenced
at the appropriate point in the specific maintenance procedure paragraph.
Blind Rivet Installation and Removal. Blind rivets are used in locations where only one side of the
area to be worked on is accessible. Blind pop rivets must be used in the shelter honeycomb panels
since the hammering required to install conventional rivets would damage the material. Type of
rivets used in the shelter are described in Table 2 and shown in following illustration. When
installing floor patches, countersunk head rivets (styles K and T) are preferred, but dome head rivets
(styles R and S) are an acceptable alternative. When installing interior wall patches, countersunk
head rivets shall be used in any instance where dome head rivets will interfere with the installation of
equipment. Closed end rivets (styles K and R) must be used for exterior repairs and floor repairs to
prevent moisture and dirt from entering panels.
Table 2. Blind Rivets
* Part No.
Style
Dim A
Dim H
Dim D
Dim L
AD42H
R
0.236
0.051
1/8
0.361
AD43H
R
0.236
0.051
1/8
0.377
AD45H
R
0.236
0.051
1/8
0.502
AD62H
R
0.375
0.081
3/16
0.345
AD64H
R
0.375
0.081
3/16
0.470
AD68H
R
0.375
0.081
3/16
0.720
AD42S
R
0.236
0.051
1/8
0.361
MS20470AD6-8
R
0.250
0.067
3/16
0.375
NAS1398D4-3
R
0.250
0.067
0.156
0.326
NAS1398D4-4
R
0.250
0.067
0.456
0.388
NAS1398D6-3
R
0.375
0.080
0.187
0.350
NAS1398D6-5
R
0.375
0.080
0.187
0.475
NAS1398D6-8
R
0.375
0.080
0.187
0.662
NAS1399D4-4
R
0.225
0.042
0.125
0.385
NAS1399D4-6
R
0.353
0.070
0.187
0.537
NAS1739E4-3
R
0.286
0.047
0.173
0.375
0028 00-1