TM 10-5411-203-13
5-8.
BECKET LOOP MAINTENANCE INSTRUCTIONS (TYPE II ONLY) (CONT)
2.
Cut portion of polyester cord containing unserviceable becket loop away and discard.
3.
Cut new polyester cord to correct length.
4.
Fold new section of polyester cord to form loop (2) and stitch (3) open end of loop together 6 in. (152.4 mm) from
open end of loop.
5.
Insert loose ends of polyester cord through grommet, directing ends of cord towards cut locations until ends overlap
original cord by 1 in.
6.
Machine sew (4) flap and sections of polyester cord together at each location.
7.
Close and restitch flap enclosing polyester cord.
5-16
