TM 10-5411-203-13
5-5.
BUCKLES, FASTENERS, AND WEBBING MAINTENANCE INSTRUCTIONS (CONT)
6.
Cut piece or pieces of webbing to required length.
7.
Pass the end of the webbing through the hardware, turn under the raw edge, and fold under at the buckle or fastener.
8.
Stitch the underlap in place with two rows of stitching 1/8-inch from the edge. Tack all seams.
9.
Sew the webbing to the connector assembly with X-shaped seams and border. Refer to para 4-9 for stitching
procedures.
5-11