TOGGLE MAINTENANCE INSTRUCTIONS (TYPE II ONLY)

GROMMET MAINTENANCE INSTRUCTIONS (CONT) - TM-10-5411-203-13_123

BECKET LOOP MAINTENANCE INSTRUCTIONS (TYPE II ONLY)

TM-10-5411-203-13 Complexing Kit Passage-ways Complexing Kit Passageways Type II Class A Class B Type I Manual
Page Navigation
119

TM 10-5411-203-13 5-7. TOGGLE MAINTENANCE INSTRUCTIONS (TYPE II ONLY) This task covers: Replacement of toggle and cord INITIAL SETUP Tools Repair kit, tentage (Appendix B, Section III, Item 2) Tape, measuring (Appendix B, Section III, Item 7) Materials/Parts Cord, polyester (RPSTL item) Toggle wood (RPSTL item) Equipment Condition Complexing Kit Passageway removed from shelter. (Refer to para 2-5.) REPLACE 1. Cut and remove all the cord stitches that anchors the toggle. Clean away all pieces of thread. 2. Obtain a new or salvaged toggle (1) the same type and size as the defective toggle. If the toggle is missing, check the repair parts technical manual for the correct replacement item. 3. Measure and cut a piece of new cord long enough to make the repairs. 4. Wrap the cord (2) around the center of the toggle one and a half times and secure with a single overhand knot in a manner that prevents removal of the toggle. 5. Machine sew (3) the toggle cord to secure the cord to the connector fabric. 5-14

Privacy Statement
Press Release
Contact