TM 10-5411-203-13
4-28.
BUMP THROUGH DOORS PIVOT ASSEMBLY MAINTENANCE INSTRUCTIONS
This task covers: Replace
INITIAL SETUP
Tools
Tool kit, general mechanic's (Appendix B, Section III, Item 1)
Parts/Materials
Pivot assembly
Equipment Condition
Door removed from ISO frame assembly. (Refer to para 2-5.)
REMOVE
1.
Loosen and remove two nuts and bolts (]) securing pivot assembly (2) to door (3).
2.
Remove pivot assembly (2) from door (3).
INSTALL
1.
Mount pivot assembly (2) on inside of door (3), aligning holes.
2.
Install two nuts and bolts (1).
NOTE
FOLLOW-ON MAINTENANCE: Install and adjust door. (Refer to para 2-4.)
4-43