BUMP THROUGH DOORS PEDESTAL ASSEMBLY MAINTENANCE INSTRUCTIONS

BECKET LOOP MAINTENANCE INSTRUCTIONS (TYPE II ONLY) (CONT) - TM-10-5411-203-13_106

BUMP THROUGH DOORS PIVOT ASSEMBLY MAINTENANCE INSTRUCTIONS

TM-10-5411-203-13 Complexing Kit Passage-ways Complexing Kit Passageways Type II Class A Class B Type I Manual
Page Navigation
102

TM 10-5411-203-13 4-27. BUMP THROUGH DOORS PEDESTAL ASSEMBLY MAINTENANCE INSTRUCTIONS This task covers: Replace INITIAL SETUP Tools Tool kit, general mechanic's (Appendix B, Section III, Item 1) Parts/Materials Pedestal assembly Equipment Condition Door removed from ISO frame assembly (Refer to para 2-5.) REMOVE Loosen captive two screws (1) securing pedestal assembly (2) to ISO frame (3). INSTALL 1. With height adjustment screw facing inside ISO shelter, align captive two screws (1) on pedestal assembly (2) with holes ISO frame (3). 2. Tighten two screws (1). NOTE FOLLOW-ON MAINTENANCE: Install and adjust door. (Refer to para 2-4.) 4-42

Privacy Statement
Press Release
Contact