TM 10-5411-201-14
T.O. 35E4-178-1
4-24.
CONTAINER LIFT JACK ASSEMBLY SERVICE AND REPAIR
This task covers:
a.
Disassembly
d.
Lubrication
b.
Cleaning, Inspection
e. Assembly
c.
Repair
INITIAL SETUP
Standard tools
Materials
General mechanics tool kit
Grease, Item 12, Appendix E
Grease gun
DISASSEMBLY
1.
Remove nut (l), spring plunger
(2), pin (3), and handle (4).
2.
Remove pin (4) and separate
handle (5) from support (6).
Remove two O-rings (30) from
handle (5).
3.
Remove grease fitting (7).
4.
Remove rivet (8) to remove
lanyard (9) and safety pin (10).
NOTE
Do not remove lanyard unless
pins or cables are damaged.
5.
Remove screws (11), lockwashers
(12), and spring tension clip (13).
6.
7.
8.
9.
10
Remove cotter pin (14), washer (15), pin (16), and spacers (17) to
remove base (18) from basic jack.
Remove inside tube (19) and jack screw (20) from outside tube (21).
Remove bearing (22).
Drive pin (23) out through access hole and remove jack screw (20)
from inside tube (19).
.
Remove screws (24), retainer (25), and rotating insert (26).
11.
Remove screws (27), lockwashers (28), and handle (29).
Remove
O-rings (30).
4-115
