TM 10-5411-201-14
T.O. 35E4-178-1
4-23.
(cont)
1.
Remove screws (1) and washers (2) and remove cam strike (3).
2.
Drill out blind rivets (4) and remove threshold (5).
(Refer to
paragraph 4-33
3.
Drill out blind rivets (6) and remove strike cup (7).
(Refer to
paragraph 4-33
4.
Peel off seal (8).
5.
Drill out blind rivets (9) and remove grommets (10).
(Refer to
paragraph 4-33)
6.
Drill out blind rivets (11) and remove closeout seal. (12).
(Refer
to paragraph 4-33)
7.
Remove screws (13) from cable guide bracket (14).
4-110
