TM 10-5411-201-14
T.O. 35E4-178-1
4-22. (cont)
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
4-106
Assemble hinges (26 and 27) and secure with rivets (25).
NOTE
The rivets on each end of the hinges are special
high strength rivets and require the use of
installation tool.
Insert three rivets at threshold. (Refer to
paragraph 4-33)
Refer to paragraph 4-33
Position spacer (23) and install screws (22).
Position latch (21) and install screws (20).
Position retainer strip (19) and install
rivets (18). (Refer to paragraph 4-33)
Coat strike cup (17) and latch pan (15)
mating surfaces and sidewall panel
mounting areas with adhesive.
Position strike cup (17) and install
rivets (16). (Refer to paragraph 4-33)
Position latch pan (15) and latch (14)
and install rivets (13). (Refer to
paragraph 4-33).
Position brace cup (12) and install rivets
(11). (Refer to paragraph 4-33)
Coat strap brackets with sealant.
Position strap (10) and install with washers (9), lockwashers (8), and bolts (7).
Position stowage bracket (6) and install screws (5).
Position bumper pad (4) and install rivets (3). (Refer to paragraph 4-33)
Position jack support bracket (2) and install screws (1).
CHANGE 6
I U.S. GOVERNMENT PRINTING OFFICE: 1993 - 755-028/80351
