TM 10-5411-200-14
T.O. 35E4-177-1
4-22. (cont)
Sidewall Closeout panel
15.
16.
17.
18.
19.
20.
21.
Remove captive screw (31) and two washers
(32) at each of four locations on ECU
intake and return closeout panels (34).
Remove weather seals (33) from ECU intake
and/or return closeout panels (34).
(Refer to paragraph 4-40)
Remove screws (35) and using snap
ring pliers remove retaining
rings (36) from closeout panels
(37 and 38).
Drill out rivets (39) and
remove recessed handle (40) from
closeout panels (37 and 38).
(Refer to paragraph 4-32)
Drill out rivets (41) and remove
stowage brackets (42) from
stowage bracket pan (43). (Refer
to paragraph 4-32)
Drill out rivets (44) and
remove stowage bracket pan (43)
from closeout panels (37 and 38).
(Refer to paragraph 4-32)
Drill out rivets (45) and remove
retainer strips (46) from closeout
panels (37 and 38). (Refer to
paragraph 4-32)
4-102
CHANGE 5
