RECEPTACLE OUTLETS TESTING, REPLACEMENT, AND REPAIR (cont)

RECEPTACLE OUTLETS TESTING, REPLACEMENT, AND REPAIR

RECEPTACLE OUTLETS TESTING, REPLACEMENT, AND REPAIR (cont) - TM-10-5411-200-14_122

TM-10-5411-200-14
Page Navigation
101

TM 10-5411-200-14 T.O. 35E4-177-1 4-13. (cont) 2. Disconnect wires from cable and receptacle assemblies at circuit breakers CB3, CB5, and CB7. (Refer to paragraph 4-46 and 4-47) NOTE Tag wires for reconnection 3. Using screwdriver, back out two captive screws (3) on each junction box assembly (4) and remove cable and receptacle assemblies from walls. DISASSEMBLY 1. Remove screws (1) and duplex covers (2). 2. Remove screws (3) and duplex receptacles (4) from junction boxes (5) as far as they will go. 3. Remove wire nuts (8) and terminals, and disconnect wires from rear of receptacles (4), where applicable. NOTE Tag wires for reconnection 4. Remove liquid tight connectors (6) from junction boxes (5) and separate connectors from electrical cords (7). 5. Remove captive screws (9) from junction boxes (5). 4-38

Privacy Statement
Press Release
Contact