TM 10-5410-230-13
g.
Apply a second coat of adhesive (3) to patch
and inside adhesive circle.
h.
Wait ten to fifteen minutes for adhesive (3)
to become tacky to touch.
i.
Center patch (1) over circle, adhesive side
down, and press the two sticky surfaces
together.
j.
Using hand roller (2), press excess adhesive
(3) and air bubbles (4) from under patch.
Roll first in one direction, then in opposite
direction.
k.
Using tongue depressor (1), apply a small
amount of adhesive (2) to edge of patch (3).
Run tongue depressor (1) around patch (3)
to seal and prevent fraying.
l.
Allow adhesive (2) to dry.
4-5
