TM 10-5410-224-14
(7) Removal and replacement of tine guide
(d) Replace cap (15) by securing to tine
guide assembly (13) using 10 rivets (14).
assembly (fig. 11-2). To remove and replace tine
(e) Attach tine guide assembly (13) to
guide assembly (13), proceed as follows:
center structure floor panel using four screws (11).
(a) Remove 26 rivets (12) securing tine
(f) Secure tine guide assembly (13) using 10
guide assembly (13).
rivets (14).
(b) Remove four screws (11) to detach tine
guide assembly (13).
(c) Remove 10 rivets (14) to detach cap
(15).
11-5
