TM 10-5410-223-14/1
and accelerator to a mixing cup (from repair kit) and
(a) Trim the damaged area of the aluminum
facing using tin snips, circular saw or other suitable
mix thoroughly using a mixing paddle from the
tool (fig. 4-17).
repair kit. The pot life of the adhesive after mixing is
(b) With a knife, cut into the entire thickness
45 minutes.
of the honeycomb, trimming the core to the same
(2) Repairing honeycomb panel with damage to
size as the trimmed hole in the facing (fig. 4-17).
one surface only. Repair damaged honeycomb panel
as follows:
4-62
