TM 10-5410-221-24
1
Screw (4)
4
Input power terminals
7
Screw (2)
2
Light assembly
5
Ground terminal
8
Flange assembly
6
Input power leads
Figure 2-8--Continued.
b. Power
Distribution Panel Assembly Test.
identification. Continuity must exist through wire and
cable assemblies and their connectors and terminal
Check continuity
of panel assembly using a continuity
boards. Re- place any damaged or missing receptacle
light, multimeter
or other continuity checking device.
covers.
Refer to figure
2-19
