M1070 HET ARMOR KIT
II113400
Rev. D
6. Install windshield clamp brackets as follows (see Figure 3-7):
a. Install two windshield clamp brackets (1) onto inside row of studs on windshield stud plate mounted on
center post of windshield and secure each with four flat washers (2) and locknuts (3). Torque locknuts to
7 lb-ft.
b. Install five bolts (4), ten flat washers (5), and five locknuts (6). Torque locknuts to 9 lb-ft.
c. Torque windshield bracket setscrews to 7 lb-ft. For windshield bracket fasteners that cannot be accessed
with a torque wrench, use the following guideline: Tighten the bolt to remove free play, mark the
position, and then tighten it an additional 1/2 to 3/4 turn
1
2
3
6
2
2
4
JUNE 2005
