TM 9-2330-390-14&PLUBRICATION CHARTDOLLY SET: LIFT, TRANSPORTABLE SHELTER,7-1/2 TON, M1022A1(NSN 2330-01-378-9997)(EIC: CML)This Lubrication Chart Is for Crew/Operator (C) orUnit (0) Maintenance. Lubrication Intervals (on-con-dition or hard time) are based on normal operation.Lubricate more during constant use and less duringInactive periods. Use correct grade of lubricant forseasonal temperature expected.goggles and gloves, and use only in a well-ventilated area. Avoid contact with skin,eyes, and clothes, and DO NOT breathevapors. DO NOT use near open flame orexcessive heat. The solvent’s flash point is100°F-138°F (38°C-59°C). if you be-come dizzy while using cleaning solvent,For equipment under manufacturer’s warranty, hardimmediately get fresh air and medical help.time oil service intervals shall be followed. intervalsif solvent contacts eyes, immediately washshall be shortened if lubricants are known to be con-your eyes and seek medical attention.taminated or If operation Is under adverse conditions(e.g., longer than usual operating hours, extendedIdling periods, extreme dust, etc.).Clean all fittings and area around lubrication pointswith dry cleaning solvent (Item 27, Appendix F) orOil filters shall be serviced/cleaned/changed, asequivalent before lubricating equipment. After lubri-applicable, when:cation, wipe off excess oil or grease to prevent accu-mulation of foreign matter.a. They are known to be contaminated orclogged; orBefore you start your lubrication service:b. At prescribed hard time intervals.ALWAYSThis dolly set is not enrolled In the Army Oil AnalysisProgram (AOAP). HARD TIME INTERVALS APPLY.On illustrations, a dashed line (- - -) means lubrica-tion points on both sides.a. Clean grease fittings before lubricating.b. Use the Lubrication Chart as your guide.NEVERa. Use wrong type/grade grease.Dry cleaning solvent, P-D-680, is toxic andflammable.Alwayswear protectiveb. Use too much lubricant.3-2
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business