TM 9-4931-374-13&P
17
MOUNTING BRACKET (15).
a. Remove two hex head capscrews (16)
16
SWITCHBOX (5).
14
HEX NUT (11) AND WASHER (12).
and two flat washers (17).
Remove.
a. Loosen connector (14).
b. Remove.
15
MICROSWITCH (13). Remove.
b. Pull from six wires (7).
REPAIR
MODIFICATION
NOTE
Modification of the switchbox
NOTE
may be necessary when the
switchbox is replaced by a
The hex nut is a component
new one.
of the toggle switch.
1
SWITCHBOX (1).
Repair is by replacement of authorized parts
(app C) as required.
a. On the back, drill two 0.25-in. (0.64-cm)
holes (2), using the mounting bracket (3)
as a template.
b. On the back, drill one 0.53-in. (1.35-cm)
hole (4), using the mounting bracket (3)
as a template.
3-189