TM 9-4931-374-13&P
3-14. SHOP SET--CEILING MODIFICATION--MAINTENANCE INSTRUCTIONS (cont)
REASSEMBLY (cont)
4
BLIND INSERT (7).
WARNING
Dry cleaning solvent is flammable and should not be
used near an open flame or in a smoking area. Use only
in well-ventilated areas. The solvent evaporates quickly
and has a drying, possibly damaging, effect on skin.
a. Wearing gloves (item 9, app D),clean with a cloth (item 17, app D)
dipped in dry cleaning solvent (item 6, app D).
b. Install on hydraulic gun.
c. Insert in 0.531-in. (1.349-cm) diameter hole (8) and pull up tight with
hydraulic gun. (See page 3-148 for location of all blind inserts.)
5
CAULK GUN (3).
WARNING
NOTE
Dry cleaning solvent is flammable and should not be
The adhesive is a mixture and must be mixed according
used near an open flame or in a smoking area. Use only
to supplier's instructions.
in wellventilated areas. The solvent evaporates quickly
and has a drying, possibly damaging, effect on skin.
a. Fill with adhesive (item 2, app D).
CAUTION
b. Insert into one 0.125-in. (0.318-cm) diameter hole (9).
After performing step 6 allow time for adhesive to set
before using blind inserts.
c. Release adhesive until it flows from the other 0.125-in. (0.318 cm)
diameter hole (10).
3-152
