TM 9-4931-374-13&P
3-14. SHOP SET--CEILING MODIFICATION--MAINTENANCE INSTRUCTIONS (cont)
REASSEMBLY
CAUTION
Clean blind inserts just prior to installation and handle
WARNING
only when wearing gloves.
Dry cleaning solvent is flammable and should not be
used near an open flame or in a smoking area. Use only
NOTE
in well-ventilated areas. The solvent evaporates quickly
Steps 1 thru 6 pertain to only one blind insert. Repeat
and has a drying, possibly damaging, effect on skin.
procedures as required for additional blind inserts.
1
BLIND INSERT (1).
a. Wearing gloves (item 9, app D) clean with a cloth (item 17, app D)
dipped in dry cleaning solvent (item 6, app D).
b. Install on hydraulic gun.
c. Insert in 0.375-in. (0.953-cm) diameter hole (2) and set with hydraulic
gun. (See page 3-148 for location of all blind inserts.)
3-150
