TM 9-4931-374-13&P
6
RIGHT TABLE (4). Mark four mounting
hole
locations
using
magnifier
instrument (3) as a template.
7
MAGNIFIER
INSTRUMENT
(3).
Remove.
8
RIGHT TABLE (4). Drill four 0.500-in.
(1.27-cm) diameter holes through top at
marked locations.
INSTALLATION
1
MAGNIFIER INSTRUMENT (1). Place
on right table (2) over four mounting
holes.
2
FOUR
SCREWS
(3),
FOUR
LOCKWASHERS -(4), AND FOUR
FLAT WASHERS (5). Assemble and
install through mounting holes in right
table (2) from underneath.
3
FOUR FLAT WASHERS (6) AND
FOUR NUTS (7). Install onto four
screws (3).
3-141
