TM 9-4931-374-13&P
3-13. SHOP SET--INSTALLED EQUIPMENT LIST--MAINTENANCE INSTRUCTIONS (cont)
MODIFICATION OF TABLES (cont)
2
LEFT TABLE (2). Mark four mounting hole locations using machinist's
vise (1) as a template.
3
MACHINIST'S VISE (1). Remove.
4
LEFT TABLE (2). Drill four 0.500-in. (1.27-cm) diameter holes through
top at marked locations.
5
MAGNIFIER INSTRUMENT (3). Position on right table (4) as follows:
the left edge of the magnifier instrument should be 10.00 in. (25.40 cm)
from personnel door end of the right table; the front edge of the
magnifier instrument should be 12.00 in. (30.48 cm) from front edge of
the right table.
3-140