TM 9-4931-374-13&P
13-10. SHOP SET--ELECTRICAL INSTALLATION--MAINTENANCE INSTRUCTIONS (cont)1
REASSEMBLY (cont)J
NOTE
The following five procedures
pertain to wires 9, 10, and 11,
for initial installation only or
replacement
of
complete
harness assembly.
15
BLACK WIRE NO. 9 (36), WHITE WIRE
NO. 10 (37), AND GREEN WIRE NO. 11
(38) IN CONDUIT BOX J20 (34). Form 6-
in. (15.25-cm) service loop (39).
16
GREEN WIRE NO. 11 (38) IN CONDUIT
BOX J21 (32). Form 6-in. (15.25 cm)
service loop (40).
17
SERVICE LOOP (39) IN CONDUIT BOX J20 (34).
a. Cut in center.
b. Strip insulation (41) back 0.5 in. (1.27 cm) from ends of all cut wires.
c. Install two lug terminals (42) on green wire no. 11 (43) and green
wire no. 11 (44).
3-84
