TM 9-4931-374-13&P
18
SERVICE LOOP (40) IN CONDUIT BOX
J21 (32).
a. Cut in center.
b. Strip insulation (41) back 0.5 in. (1.27
cm) from ends on cut wires.
c. Install two lug terminals on green wire
no. 11 (44) and green wire no. 11 (45).
19
GREEN WIRE NO.
11 (45) IN
SWITCIHBOX S9 (30). Install lug terminal
(42).
NOTE
The following procedure pertains to wires 4, 5, and 6, for
initial installation only or replacement of complete
harness assembly.
20
THREE LUG TERMINALS (42). Install on blue wire no. 4 (46), blue
wire no. 5 (47), and blue wire no. 6 (48) in switchbox S9 (30).
21
THREE TERMINAL SCREWS (49).
Remove from microswitch S9
(50).
3-85
