TM 9-2330-390-14&P
Change 4 5-45
5-10.
HYDRAULIC LIFT CYLINDER REPAIR (M1022A1 WITH SIDE LIFT KIT) (Con't).
CAUTION
Use caution not to score piston tube assembly.
17.
Slide gland cap (5), new packing set (9), round ring (10), and stop ring (12) onto piston tube assembly (6).
18.
Install round ring (11) into groove of piston tube assembly (6).
19.
Slide stop ring (12) toward piston end until it
contacts round ring (11). Rotate stop ring to
ensure that milled slot (17) is alined over hole
(41) in piston tube assembly (6).
20.
Insert hooked end (40) of square retaining ring
(13) into hole (41) of piston tube assembly (6).
Rotate stop ring (12) by hand as far as possi-
ble.
21.
Rotate stop ring (12) one full turn. DO NOT
allow hooked end (40) of square retaining ring
(13) to pass under milled slot (17).
22.
Hold down square retaining ring (13) and
reverse rotation of stop ring (12). Rotate stop
ring one half turn until milled slot (17) is oppo-
site hole (41) of piston tube assembly (6).
