TM 9-2330-390-14&P
5-42 Change 4
5-10.
HYDRAULIC LIFT CYLINDER REPAIR (M1022A1 WITH SIDE LIFT KIT) (Con't).
CAUTION
Use caution not to score piston tube.
3.
Slide stop ring (27) onto piston tube (7).
4.
Install round ring (26) in groove of piston tube
(7).
5.
Slide stop ring (27) toward piston end until it
contacts round ring (26). Rotate stop ring to
ensure that milled slot (32) is alined over hole
(39) in piston tube (7).
6.
Insert hooked end (38) of square retaining ring
(28) into hole (39) of piston tube (7). Rotate
stop ring (27) by hand as far as possible.
7.
Rotate stop ring (27) one full turn. DO NOT
allow hooked end (38) of square retaining ring
(28) to pass under milled slot (32).
8.
Hold down square retaining ring (28) and
reverse rotation of stop ring (27). Rotate stop
ring one half turn until milled slot (32) is oppo-
site hole (39) of piston tube (7).
26
27
28
28
27
32