TM 9-2330-390-14&P
4-130. STARTER REPLACEMENT (Con't).
3.
Remove two flange bolts (8) and starter (1) from crankcase (7).
1.
2.
3.
Install starter (1) on crankcase (7) with two flange bolts (8).
Connect wiring harness connector (6) to starter (1).
Install positive (+) battery cable (5) and wiring harness red wire (4) on starter (1) with new springwasher (3) and
nut (2).
Follow-on Tasks:
Install spiral case (see paragraph 4-128).
Install engine (front dolly) (see paragraph 4-115).
Connect negative (-) ground cable to battery (rear dolly) (see paragraph 445).
Start engine (see paragraph 2-20) to check operation of starter.
4-383
