TM 9-2330-390-14&P
4-89. REAR DRAWBAR PIN ASSEMBLY REPLACEMENT (Con't).
1.
Remove safety pin (6) from pin (5).
2.
Cut lanyard cable (4) from pin (5). Discard lanyard
cable and sleeve (7).
1.
Install lanyard cable (4) through hole in pin (5). Pull loop snug and install new sleeve (7). Crimp sleeve.
2.
Install safety pin (6) through pin (5).
Feed lanyard cable (4) through hole in rear drawbar (2). Pull loop snug and install new sleeve (3). Crimp sleeve
Follow-on Tasks:
• Install rear drawbar (see paragraph 4-88).
4-237
