TM 9-2330-390-14&P
4-86. TELESCOPIC BRACE REPLACEMENT (Con't).
4.
Remove brace (6) from brace (1).
5.
If detent pins (3 and 7) are damaged, remove with lanyard assemblies (2) (see paragraph 4-99).
1.
If removed, install detent pins (3 and 7) and lanyard assemblies (2) (see paragraph 4-99).
2.
Install brace (6) inside brace (1).
3.
Install detent pin (5) in fourth hole from end of brace (6).
4.
Install brace (1) on top beam (4) with detent pin (3).
NOTE
On rear dolly, telescopic brace is Installed on telescopic brace bracket bolted to rear
drawbar.
5.
Install brace (6) on front drawbar (8) with detent pin (7).
4-233