TM 9-2330-390-14&P
4-42. IDENTIFICATION LIGHT MAINTENANCE (Con’t).
3.
Connect identification light connector plug (5) to cable assembly connector plug (6).
1.
Position identification light (14) at pivoting tray (4) with two leads (12) through hole in pivoting tray.
2.
Install identification light (14) on pivoting tray (4) with four panhead screws (13) new lockwashers (11)
fiatwashers (10), two ground wires (8 and 9), and four new locknuts (7).
Follow-on Tasks:
• Connect intervehicular cable to towing vehicle (see paragraph 2-11).
• Check operation of identification light.
4-77
