TM 9-2330-390-14&PSection II. SERVICE UPON RECEIPTParagraphNumberPageParagraph TitleNumber4-4.4-5.4-6.General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Inspection Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Servicing Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-24-24-34-4.GENERAL.When a new, used, or reconditioned M1022A1 Dolly Set is first received, determine whether it has beenproperly prepared for service and is in condition to perform its mission. Follow the inspection instructions inparagraph 4-5 and servicing instructions in paragraph 4-6.4-5.INSPECTION INSTRUCTIONS.a.Read and follow all instructions on DD Form 1397.b.Remove all straps, plywood, tape, seals, wrapping, or any other shipping material.Dry cleaning solvent, P-D-680, is toxic and flammable. Always wear protectivegoggles and gloves, and use only in a well-ventilated area. Avoid contact with skin,eyes, and clothes, and DO NOT breathe vapors. DO NOT use near open flame orexcessive heat. The solvent’s flash point is 1000F-1380F (38OC-59OC). If youbecome dizzy while using cleaning solvent, immediately get fresh air and medical help.If solvent contacts eyes, immediately wash your eyes and seek medical attention.c.If any exterior parts are coated with rust preventive compound, remove with dry cleaning solvent(Item 27, Appendix F) and rags (Item 25, Appendix F).d.Inspect the equipment for any damage incurred during shipment. Also check to see if the equipment hasbeen modified.e.Check the equipment against the packing slip to ensure that the shipment is complete. Report anydiscrepancies in accordance with instructions in DA Pam 738-750.4-2
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
